Table of Contents
Advertisement
: When the speaker is powered on, the four Charge Level LEDs indicate the
charge level of the built-in rechargeable battery. While the battery is being
charged, the Charge Level LEDs will flash blue to indicate that charging is in
progress. When charging is complete, the all four Charge Level LEDs will be
illuminated blue. The single square LED to the right of the four Charge Level LEDs
is the Connection Status LED. The Connection Status LED flashes blue when the
speaker is in Bluetooth® pairing mode, is solid blue when there is a valid
Bluetooth connection, and is red when the AUX input is being used.
Side Panel
:
Plug the included micro USB charging cable into the DC 5V port, then plug
the other end into a USB power source.
:
To charge a mobile device, plug a USB charging cable into your mobile
device, then plug the other end into the USB port on the speaker.
:
Plug the included 3.5mm audio cable into the AUX jack, then plug the other
end into the headphone jack on an audio source device. Note that the AUX
input is disabled when a valid Bluetooth® connection exists.
6
Advertisement
Table of Contents
