Key Operator Tools - Savin 2335 Manual

AdonisC2-sysEN122F_FM.book Page 47 Thursday, February 1, 2001 1:46 PM
❖ ❖ ❖ ❖ Recall Interval Time
Specifies the interval the machine waits before resending data or a document,
if a data could not be sent to the ScanRouter V2 Professional.
Note
❒ Default: 300 Seconds
❒ Enter an interval within the range of "60 -999 seconds" (in one second in-
tervals) with the number keys.
❒ This setting is for the Scanner function. The distribution of received fax
documents will still be performed.
❖ ❖ ❖ ❖ Number of Recalls
Note
❒ Default: Yes
❒ Enter a number of times within the range of "1-99" with the number keys.
❒ The default setting is 3 times.
❒ This setting is for the Scanner function. The distribution of received fax
documents will still be performed.

Key Operator Tools

If an access code has been set, you cannot use the Key Operator Tools unless you
enter the access code (max. 8 digits). ⇒ P.48 "Key Operator Code"
Reference
For details about user codes, ⇒ P.49 "User Code"
❖ ❖ ❖ ❖ User Code Management
Allows you to control who uses the machine by setting user codes for users.
Note
❒ Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/OFF
❒ By using "Auto Registration" for the printer you can keep a print log for
each user code entered from the driver.
❖ ❖ ❖ ❖ Key Counter Management
Use the key counter to specify whether users are limited or not.
Note
❒ Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/OFF
Settings You Can Change with the User Tools
1
/
2
3
47