7.6
INSTALLATION OF HIGH WIND WEDGE KIT
This High Wind Wedge Kit is for Wolf Steel Condo Pack PSC Series, containing the High Effi ciency Gas Condensing Heat Module
(CCGM). Ensure all parts are in the kit before proceeding. Do not proceed if parts are missing.
PROCEDURE
(
Please read entire instructions fi rst.)
1.
Align High Wind Kit (W010-4149), in the correct orientation
to the Condo Pack as shown below.
3.
Secure kit using Screws (N570-0008)(x4) provided, as
shown.
HIGH WIND WEDGE KIT
(CCGM MODULE - CONDO PACK)
N570-0008 (X4)
W010-4149
KIT CONTAINS :
QTY DESCRIPTION
1
ASSY, HIGH WIND WEDGE (CCGM)
5
SCREW, #8 X 1/2 HEX HD TEK STN
(4 REQUIRED, 1 EXTRA PROVIDED)
2.
Place High Wind Kit (W010-4149) over the exhaust tube
and against the grill face.
4.
The Wind kit should be secured fl ush and straight to the
grill face tight with no air gaps.
55
W415-2006 / 01.20.17
IOM
PART #
W010-4149
N570-0008
W415-1307 / B / 03.31.2017