Wall Sleeve Assembly - Wolf Steel Condo Pack Installation And Operating Instructions Manual

4.4

WALL SLEEVE ASSEMBLY

THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED SERVICE PERSONNEL FOR PROPER
INSTALLATION, ADJUSTMENT AND OPERATION OF THE UNIT. READ THESE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING INSTALLATION OR OPERATION. IMPROPER INSTALLATION, ADJUSTMENT, SERVICE,
OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
CONSULT A QUALIFIED INSTALLER OR SERVICE AGENCY FOR INFORMATION AND ASSISTANCE.
INCLUDED IN THE CWSMUA KIT:
ITEM QTY PART NAME
1
1 TOP PANEL
2
1 BASE PANEL
3
1 RIGHT SIDE PANEL
4
1 LEFT SIDE PANEL
5
2 SIDE SUPPORT BRACKET
6
1 TOP SUPPORT BRACKET
SCREW #8-32X.315 STEEL
7
25
TRILOBULAR
10
2 SQUARING BRACE
11
1 SQUARING BRACE MIDDLE
12*
1 *TOP PANEL BRACKET
SHOWN BUT NOT INCLUDED IN THE CWSMUA KIT:
ITEM QTY
8
12.5 feet
9
IMPORTANT
!
*
DO NOT DISCARD ITEM #12
(TOP PANEL BRACKET, W080-1721).
THIS BRACKET IS USED TO SECURE
THE CONDOPACK CABINET TO THE
WALL WHEN FOLLOWING WALL
SLEEVES ARE USED: CWSMUA15,
CWSMUA17 OR CWSMUA19.
The wall sleeve is designed to be installed into
the wall during the construction of the building,
in order to provide an accurate opening and
easier installation of thru-the-wall packaged
unit later on, after building is completed.
LEGEND
1� Top Panel
2� Base Panel
3� Right Side Panel
4� Left Side Panel
5. Side Support Bracket
6� Top Support Bracket
7. Screw #8-32x.315 Steel Trilobular
8� Gasket D-Channel 28.9" long
9. Gasket D-Channel 44" long
10� Squaring Brace
11� Squaring Brace Middle
12� *Top Panel Bracket
WARNING
!
MANUFACTURING
DESCRIPTION
PANEL, SLEEVE TOP PWDER
PANEL, SLEEVE BASE PWDER
PANEL, SLEEVE RS PWDER
PANEL, SLEEVE LS PWDER
BRACKET, SIDE SUPPORT
BRACKET, TOP SUPPORT
SCREW, #8-32 x .315 QUAD
HEX WASHER
BRACE, SQUARING
BRACE, SQUARING
*BRACKET, TOP PANEL (CP)
PART NAME
Gasket D-Channel 28.9" long
Gasket D-Channel 44" long
!
4
!
CWSMUA CWSMUA15
W475-0978-(color code)
W475-0975-(color code) W475-1307-(color code)
W475-0977-(color code) W475-1309-(color code)
W475-0976-(color code) W475-1308-(color code)
N/A
MANUFACTURING DESCRIPTION
GASKET, D-CHANEL EPDM [included in baggies provided with CondoPack unit]
1
10
9
2
DIAGRAM (A)
TABLE 3
PART NO
CWSMUA17 CWSMUA19
W475-1313-(color code) W475-1317-(color code)
W475-1310-(color code) W475-1314-(color code)
W475-1312-(color code) W475-1316-(color code)
W475-1311-(color code) W475-1315-(color code)
W080-1444
W080-1445
W570-0162
W080-1433
W075-0019
*W080-1721
12
6
8
10
3
11
8
W415-1307 / B / 03.31.2017
17
IOM
PART NO
W290-0256
5
7