Maintenance - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Firmware Update
Update
Notification

Maintenance

Settings item
Print Quality
Adjustment
Print Head Nozzle
Check
Head Cleaning
Ink Cartridge(s)
Replacement
Replace Maintenance
Box
Replace Cutter
Using the Menu
Settings value
*
Off
On
Settings value
Start
Start
Start
Display procedure
Display procedure
Start
User's Guide
Explanation
Using this function requires that the printer be connected to a
network that can be connected to the Internet. Touch Start
Checking to access the Epson website, and to start a search for
new firmware. If there is a display indicating that there is new
firmware, then follow the on-screen instructions to update the
firmware.
Updating firmware takes approximately 5 minutes. However, this
may take longer depending on the network environment.
During update, do not turn off the printer or unplug the power
cable from the outlet. Failure to observe this precaution could lead
to damage.
Set On to automatically check periodically for new firmware. If new
firmware is found, a message will be displayed when the power is
turned on.
Explanation
Perform the same adjustment as in Media Adjust in the Paper
Setting menu. When carrying out this action from this menu, select
the paper source from the first screen.
"Optimizing Paper Settings (Media Adjust)" on page 41
U
Check for clogged nozzles by printing a check pattern.
"When you want to unclog the print head" on page 156
U
Perform if the printed check pattern has faint or missing areas.
"When you want to unclog the print head" on page 156
U
Select when replacing an ink cartridge while confirming the
procedure. If you are familiar with replacement and do not need to
confirm the procedure, you can replace the ink cartridge without
selecting this menu item.
"Replacing Ink Cartridges" on page 144
U
Select when replacing the Maintenance Box while confirming the
procedure. If you are familiar with replacement and do not need to
confirm the procedure, you can replace the Maintenance Box
without selecting this menu item.
"Replacing Maintenance Box" on page 146
U
Select to replace the cutter if the paper is not cut cleanly. Follow the
on-screen instructions to replace.
"Replacing the Cutter" on page 147
U
138