Epson SC-T5400 Series User Manual page 115

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Paper Size Check
Auto Cut
Remove Skew
Manage Remaining Amount
Setup
Remaining Amount
Remaining Alert
Change Paper Type
User's Guide
Using the Menu
Settings value Explanation
* Displayed when Custom Paper is selected in Paper Type. Select
On
whether to detect (On) or not detect (Off) the paper width when
paper is loaded. Try choosing Off if a paper setting error is
Off
displayed even though the paper is correctly loaded. Note,
however, that the printer may print outside the paper when Off is
selected. If it prints beyond the edges of the paper, the inside of the
printer becomes dirty with ink. We generally recommend using the
printer with this set to On.
The changes are applied after the paper is reloaded. Note that they
are not applied if you just change the menu items.
* Select whether to automatically cut (On) or not cut (Off) using the
On
built-in cutter as each page is printed on roll paper. Set On to
automatically cut the edge if it is not a horizontal cut when paper is
Off
loaded. The setting selected with the printer driver takes priority
when the printer driver is used.
"Cutting the Roll Paper" on page 31
U
*
Select whether to enable (On) or disable (Off) paper skew
On
reduction.
Off
On Select whether to display/record (On) or not to display/record (Off)
the amount of remaining roll paper. Set On to enable Remaining
*
Amount and Remaining Alert.
Off
"For Roll Paper" on page 37
U
5.0 to 150.0 m Entering the total length of the loaded roll paper in Remaining
* Amount displays an estimate of remaining amount of roll paper on
(30 )
the printer's Home screen and on the printer driver screen.
*
1.0 to 15.0 m (5.0 )
In Remaining Alert, set the limit at which to display a warning
when the amount of remaining roll paper drops below that limit.
You can set in 0.1 m increments.
Also, when the roll paper is removed, the remaining amount,
setting value of Remaining Alert, and paper type are automatically
converted to a barcode which is printed at the end of the roll paper.
The printer automatically reads the barcode and sets the settings
when you load the roll paper next time.
115