Epson SC-T5400 Series User Manual page 130

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Resolution
Color Mode (Com‐
mon)
HP-GL/2 Unique Settings
(Print settings inherent to HP-GL/2 or HP RTL modes.)
Rotate
Origin Setup
Using the Menu
Settings value Explanation
* This setting is enabled when the resolution is not specified in the sent
Standard
print data. Standard will print at the resolution corresponding to the
Paper Type setting for the paper selected in Paper Source and the
300dpi
Quality setting.
600dpi
1200dpi
EPSON Standard Optimize the sRGB space and correct the color.
(sRGB)
* Perform color correction to sharpen your images based on the sRGB
Business Graphics
space.
GIS Perform color correction suitable for when printing GIS (Geographic
Information System) topographical maps or similar.
Line Drawing Perform color correction suitable for CAD drawings and other line
drawings.
Off (No Color Do not perform color correction.
Management)
* You can rotate the coordinates of the drawn data counterclockwise in
0°
units of 90° before printing. Note that objects drawn by RTL are not
rotated. When both this setting and the RO command specify rotation,
90°
rotation is performed using the combined amount of both values. Note
180° that rotation by the RO command is for objects only (the arrow section in
the following illustration), and rotation is not performed for the drawn
270°
area (the square section in the following illustration). As a result, objects
in a section that protrude from the drawn area are not printed.
* Set the data coordinate origin.
Left Edge
Center
User's Guide
130