Epson SC-T5400 Series User Manual page 132

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Select Palette
Print Color Palette
Define Palette
Palette A
Pen 0toPen 15
Pen Width
Pen Color
Palette B
Pen 0toPen 15
Pen Width
Pen Color
Restore default
HP-GL/2 Unique Set‐
tings
Memory Device Inter‐
face
Thick Paper
Using the Menu
Settings value Explanation
* From the following selections, choose the palette that specifies the color
Software
and thickness of the logical pen.
Default
❏
Palette A
❏
Palette B
❏
When Default / Palette A / Palette B are set, the pen configuration set in
the application is ignored. Selected palette settings can be printed with
Print Color Palette and confirmed.
Print Settings of the palette selected in Select Palette are printed as A3 size.
You can check the colors corresponding to the color number for the pen
colors.
0.13 to 12.00 mm In Select Palette, selecting Palette A will print in accordance with the
settings defined here.
0 to 255
You can define a unique built-in palette by specifying the pen width and
color for the 16 types of logical pen. Select the pen number, and then
define the pen width and pen color for each pen. You can use Print Color
Palette to print and check the colors corresponding to the color number
for the pen colors.
0.13 to 12.00 mm In Select Palette, selecting Palette B will print in accordance with the
settings defined here.
0 to 255
Settings details are the same as for Palette A.
No Select Yes to restore all HP-GL/2 Unique Settings settings to the default
settings.
Yes
* Select whether to permit (Enable) or not permit (Disable) connecting a
Enable
USB flash memory to the printer and then directly printing the data in the
memory.
Disable
*
If the paper is thick, the print head may scuff the print surface. Choose On
Off
to prevent scuffing. If On is set, the platen gap, which is the distance
between the print head and paper, will widen. However, if the platen gap
On
is already at its maximum, then setting this to On will have no effect.
User's Guide
Software: Print according to the pen configuration set in the
application, and ignore the built-in palette of the printer.
Default: Print according to the settings of the built-in palette of the
printer specified in advance. The settings of the palette cannot be
changed. The built-in palette specifies a logical pen with a pen width
of 0.35 mm and 256 colors.
Palette A / Palette B: Print according to the settings of the built-in
palette that you specified for Define Palette. If Define Palette setting
is not set, the results are the same as when Default is selected.
132