Table of Contents
Advertisement
CX208/212 Programming Guide
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 57
Print Speed
<ESC>CSa
a
=
Designates the speed selection
2
=
2 ips (50 mm/s)
3
=
3 ips (75 mm/s)
Example:
<ESC>CS3
Placement:
Must be placed immediately after <ESC>A and
immediately before <ESC>Z in its own separate data
stream
Default:
As previously set in the printer configuration
To specify a unique print speed through software for a particular label.
This allows flexibility in finding the best performance and quality for
the particular label format, media, and ribbon. All subsequent labels
will print at this speed unless the speed is changed with this
command.
There is no printer output for this command. It sets the print speed of
the printer to 3 inches per second.
1. This becomes the new setting in the printer configuration for all
subsequent print jobs, unless changed. The setting is stored in
non-volatile memory and is not affected by cycling the power.
PN 9001092 Rev. A
SATO CX208/212 Printers
Advertisement
Table of Contents
