Table of Contents
Advertisement
CX208/212 Programming Guide
Special Notes
Page 62
1. A reverse image area is affected by the rotate commands.
Therefore, always assume the printer is in the normal print
orientation when designing and sending the Reverse Image
command.
2. If using reverse images with the form overlay, place this command
before the Form Overlay command in the data stream.
3. If the Rotate commands are used with this command, the V and
H parameters are reversed.
4. If the height and width to be reversed contain other than
alphanumeric data, the area is not printed.
5. If the values specified exceed the maximum ranges, the reverse
image is not created.
6. The allowable field ranges are:
Horizontal
aaaa
Vertical
bbbb
PN 9001092 Rev. A
CX208
0001 to 0832
0001 to 4060
SATO CX208/212 Printers
CX212
0001 to 1230
0001 to 3780
Advertisement
Table of Contents
