Seat Adjustment - Taylor-Dunn Huskey C-426 Operator's Manual

Seat Adjustment

WARNING
DO NOT attempt to adjust the seat while the vehicle is in motion. Adjusting the seat while
in motion could result in sudden and violent uncontrolled movement of the seat. The
sudden movement of the seat could cause the driver to lose control of the vehicle or eject
the occupant from the vehicle resulting in severe personal injury and/or property damage.
This vehicle is equipped with 3-way adjustable
seat.
1. Seat Suspension Tension: The position
of this lever changes the stiffness of the
suspension spring in the seat cushion.
There are 3 settings, the lever is shown
in the center position. Move up for
softer suspension or down for harder
suspension.
2. Seat Back Angle: Rotate the knob to
change the angle of the seat back
rest. Rotate clockwise to tilt back and
counterclockwise to tilt forward.
3. Seat Position: Allows the seat to move
forward or back. Pull the lever to
the right to unlock the seat and then
move the seat to the desired position.
Make sure the lever is securely locked
in place before operating the vehicle.
Page 22 C0-426-48AC Operator's Manual
MC-425-14