Maintenance - Bauer 1852C-B Owner's Manual & Safety Instructions

user-Maintenance and Storage
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
turn the power Switch of the appliance off and disconnect the Battery
pack before performing any procedure in this section.
tO prEVEnt SEriOuS inJury FrOM appLiancE FaiLurE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFOrE EacH uSE, inspect the
general condition of the appliance. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• clogged ventilation holes,
• dirty filter,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. Only use an undamaged filter. Replace
a damaged filter immediately.
removing Battery pack
Press down on the Battery Lock Button and pull Battery Pack out.
Motor
Housing
1
Item 64148
Battery Lock
Button
Figure B
For technical questions, please call 1-888-866-5797.
3. aFtEr uSE, wipe external surfaces
of the appliance with clean cloth.
a. Use a moist cloth to clean the
vacuum cleaner's housing.
b. Use a dry cloth to clean battery contacts.
4. Store in an indoor dry area out of reach of children.
5. All parts are permanently lubricated.
Do not use additional lubrication.
6. aFtEr EacH uSE, empty and clean
the Dust Cup and Filter (see cleaning
Dust cup and Filter on page 8),
7. Li-ion BattEry MuSt BE rEcycLED Or
DiSpOSED OF prOpErLy.
Do not short, incinerate or open battery.
2
Battery
pack
Page 7