Operation - Bauer 1852C-B Owner's Manual & Safety Instructions

Operating instructions
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Vacuum Operation
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
turn the Switch off and remove the Battery pack.
1. Make sure the Filter is installed and
assembled correctly in the Dust Cup.
2. Install the Battery Pack:
Using gentle force, slide the Battery Pack
into Motor Housing so that the Battery
Lock Button latches it in place.
Motor Housing
2
Figure a
Page 6
Battery Lock
Button
Battery pack
For technical questions, please call 1-888-866-5797.
3. Attach the desired accessory (Crevice
Nozzle, Brush Nozzle, or Floor
Brush) to the end of Dust Cup.
4. Optionally, slide the Extension Tube onto
the Dust Cup first and then the accessory
to the end of the Extension Tube.
5. Turn on the Vacuum by moving the
On/Off Switch to the ON position.
note: The Vacuum is equipped with an automatic
shut-off. If the Vacuum shuts itself off while you
are using it, follow steps in Troubleshooting.
6. To prevent accidents, turn off the Vacuum by
moving the On/Off switch to the OFF position
and remove Battery Pack after use. Clean
Filter and Dust Cup. Clean external surfaces
of the tool with clean and dry cloth. Store
the tool indoors out of children's reach.
Item 64148