Bauer 1852C-B Owner's Manual & Safety Instructions page 8

20v cordless vacuum
Hide thumbs Also See for 1852C-B:
Table of Contents

Advertisement

cleaning Dust cup and Filter
to ensure proper operation, clean the Dust cup and cloth Filter regularly. Damaged
Filters should be replaced. Disconnect Battery pack before cleaning Vacuum.
Filter
cover
DuSt cup:
1. Press the Release Button to separate the
Dust Cup from the Motor Housing.
2. Remove the Filter Assembly from the Dust Cup.
3. Shake the Dust Cup over a waste bin and, if
dirty, wipe it with a moist clean cloth. Allow
it to dry before reassembling the Vacuum.
4. Empty the Filter contents into a waste bin.
5. Inspect and, if needed, clean the Filter
by following steps 3-10 in FiLtEr.
6. Insert the clean Filter Assembly into the
Dust Cup and reattach the Motor Housing
to the Dust Cup by pressing them together
until the Release Button engages.
Page 8
release
Button
Dust
cup
Filter
cover
Filter
Seal
Figure c
For technical questions, please call 1-888-866-5797.
Filter
assembly
Dust
cup
cloth
Filter
cloth
Filter
FiLtEr:
1. Press the Release Button to separate the
Dust Cup from the Motor Housing.
2. Remove the Filter Assembly from the Dust Cup.
3. Remove the Filter Cover from the Filter Seal
by twisting them apart as shown in Figure C.
4. Remove the Cloth Filter along with its Filter Basket
from the Filter Cover and clean with a soft brush.
5. If needed, the Cloth Filter and Filter Basket can be
separated, and washed in mild soap and water.
6. Rinse all soap and dust out thoroughly.
7. allow the cloth Filter to dry for at
least one day before reinstalling.
WarninG! installing a wet cloth Filter
will increase the risk of electric shock
and may damage the vacuum.
8. To reinstall the Filter, insert the Filter Basket
into the Cloth Filter and then both items into
the Filter Cover. Be sure the Cloth Filter
covers the Filter Cover completely.
9. Attach the Filter Seal to the Filter Cover by twisting
them together as shown in Figure C. The Filler
Seal should be on snug but do not over-tighten.
10. Insert the clean Filter Assembly into the
Dust Cup and reattach the Motor Housing
to the Dust Cup by pressing them together
until the Release Button engages.
Filter
Basket
Item 64148

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents