Log In - Panasonic K-NL404K/G User Manual

Network disk recorder
Hide thumbs Also See for K-NL404K/G:
Table of Contents

Advertisement

If system finds the previous information and the channel is idle, system can map it to the
previously used channel. Otherwise system goes to the next step.
c)
Thirdly, according to the <PoE port>---<Channel> map, system can know the previous
mapping channel of current PoE port. System can select current channel if it is free.
Otherwise, it goes to the next step:
d)
Fourthly, system goes to find the first idle channel it can get.
Generally speaking, once you insert PoE, system follow the steps listed above to find the channel
available.
4)
When you insert PoE, all channels are in use now.
System can pop up a dialogue box for you to select a channel to overwrite. The title of the pop-up
interface is the name of the current operation PoE port. In this interface, All PoE channel become grey
and cannot select.
5.1.2

Log in

Open the IE and then input the NVR IP address in the address column.
For example, if your NVR IP address is 192.168.0.250, then please input http://192.168.0.250 in IE
address column. See Figure 5-1.
System pops up warning information to ask you whether install webrec.cab control or not. Please click
yes button.
If you can't download the ActiveX file, please modify your settings as follows. See Figure 5-2.
Figure 5-1
149
Input
IP
address here.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K-nl408k/gK-nl416k/g

Table of Contents