Panasonic K-NL404K/G User Manual page 222

5.8.5.7 Upgrade
The upgrade interface is shown as in Figure 5-83.
Please select the upgrade file and then click the Upgrade button to begin update. Please note the file
name shall be as *.bin. During the upgrade process, do not unplug the power cable, network cable, or
shutdown the device.
Important
Improper upgrade program may result in device malfunction! Please make sure the operation is
operated under the supervision of the professional engineer!
5.8.5.8 RS232
The RS232 interface is shown as in Figure 5-84.
Please refer to the following sheet for detailed information.
Parameter Function
Function
Baud Rate
Data Bit
Stop Bit
Parity
5.8.5.9 PTZ
The PTZ interface is shown as in Figure 5-85 (Local) and Figure 5-86 (Remote).
Figure 5-82
Figure 5-83
Figure 5-84
Select the corresponding dome protocol.
Default setup is console.
Select the baud rate.
Default setup is 115200.
The value ranges from 5 to 8.
Default setup is 8.
There are two options: 1/2.
Default setup is 1.
There are five options: none/odd/even/space/mark.
Default setup is none.
216