Real-Time Monitor; Ptz - Panasonic K-NL404K/G User Manual

5.3 Real-time Monitor

In section 2, left click the channel name you want to view, you can see the corresponding video in current
window.
On the top left corner, you can view device IP(172.11.10.11), channel number(1), network monitor bit
stream(2202Kbps) and stream type(M=main stream, S=sub stream). See Figure 5-9.
On the top right corner, there are six unction buttons. See Figure 5-10.
1: Audio Talk: Bidirectional talk.

2: Fisheye: Please note this function is for some series only. The de-warp function can present the

proper and vivid video suitable for human eyes.
3: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. right click

mouse system restores original status.
4: Local record: When you click local record button, the system begins recording and this button

becomes highlighted. You can go to system folder RecordDownload to view the recorded file.
5: Snapshot picture: You can snapshot important video. All images are memorized in system client

folder PictureDownload (default).
6: Audio: Turn on or off audio.(It has no relationship with system audio setup )

7: Close: Close video.


5.4 PTZ

Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter
5.8.5.9).
There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent
positioning key.
Click 3D intelligent positioning key, system goes back to the single screen mode. Drag the mouse in the
screen to adjust section size. It can realize PTZ automatically.
Please refer to the following sheet for PTZ setup information.
1 2 3 4
Figure 5-9
Figure 5-10
155