Maintenance - Sanyo SC-X1801 Instruction Manual

Attention: To lock the front cover firmly, snick it softly until it sounds "Click"
If the blockage is found in floor brush, hose or tubes and the
machine, the machine can be re-operated only after the
blockage is cleaned away completely.
This vacuum cleaner can be used as tip the rubbish out of the
full dust cup.
Figure_1
Figure_5

Maintenance

CAUTION
Be sure to turn the power off and unplug the unit before cleaning.
1. Clear the dust: when the dust collect to the MAX label of the filter,
rubbish shall be tipped from the dust barrel.
1) Press the front cover clip beside the suction socket and open the
front cover.
2) Take out the dust cup and clean the dust away completely.
3) Clean the dust cup with warm water if necessary.
Figure_2
Figure_6
5
Figure_3
Figure_7
Figure_4
Figure_8