Sanyo SC-X1801 Instruction Manual page 8

2. Clean Filters:
HEPA filter;
Open the front cover: Press the buttons at the both side of socket hole
1)
and open it slowly.
2) Dump the
3) Rotate the filter and detach from the filter grill. Wash the filter in warm
water and clean it with bush. Then, dry it completely before put it back
to the dust cup. Be sure to dry naturally to prevent deformation.
Figure_12
Motor exhaust filter;
1) Take out the filter (
used after drying completely before put it back to the dust cup and be
sure to dry naturally to prevent deformation.
It should be rinsed once a year.
If the filter is damaged, a new filter should be replaced.
Figure_9
Figure_12
Figure_9,Figure_10
dust collection out of the dust cup.
Figure_13, 14
) and wash in warming water. It can be
Figure_10
Figure_13
6
Figure_11
Figure_11
Figure_14