Download Print this page
Sanyo SC-X1800 Instruction Manual
Sanyo SC-X1800 Instruction Manual

Sanyo SC-X1800 Instruction Manual

Advertisement

Quick Links

INSTRUCTION MANUAL
Vacuum Cleaner
SC-X1800
Thank you for your purchase of a
SANYO Vacuum Cleaner.
Please read these instructions carefully before using this product
and keep safe for further reference.

Table of Contents

Precautions ------------------------------------------------------------------------- - 1,2
Introduction of Parts -----------------------------------------------------------
---------------------------------------------------------------- 4,5
---------------------------------------------------------------------- 5,6
------------------------------------------------------
----------------------------------------------------------------
Warning:
1. This vacuum cleaner is intended for household use only.
2. Any maintenance and repair must be handled by professional
technician. Please do not try to repair by yourself which may cause
danger!
3. The plug must be removed from the power socket before any
maintenance or replacement.
3
7
7

Advertisement

loading

Summary of Contents for Sanyo SC-X1800

  • Page 1: Table Of Contents

    Thank you for your purchase of a SANYO Vacuum Cleaner. SC-X1800 INSTRUCTION MANUAL Please read these instructions carefully before using this product and keep safe for further reference. Vacuum Cleaner Table of Contents Precautions ------------------------------------------------------------------------- - 1,2 Introduction of Parts -----------------------------------------------------------...
  • Page 2: Precautions

    place. • Precautions Blocking the suction inlet will decrease the efficiency of the motor. • Never try to vacuum the following objects. They may damage the unit or • Use only as described in this manual. Use only supplied attachments. case a fire.
  • Page 3: Introduction Of Parts

    Use Instructions 1. Connect the hose accessories; insert the hose end into the hose socket at the front cover and then hook it. Figure_1 Make sure the front cover is firmly locked before hose setting. 2. Connect the metal tube to the curved end of the hose. Figure_2 3.
  • Page 4: Maintenance

    Attention: To lock the front cover firmly, snick it softly until it sounds “Click” Clean Filters: If the blockage is found in floor brush, hose or tubes and the machine, the machine can be re-operated only after the HEPA filter; blockage is cleaned away completely.
  • Page 5: Technical Specification

    Technical Specification Input power : 1800W Input voltage : 230-240V , 50Hz Protection class: class ll Power cord length: Dust capacity : Trouble Shooting If you have a problem with your cleaner, consult the handy guide as below. If the cleaner is malfunctioning, do not operate it before asking for service. Problem Possible Solution Clean the filter and clean up the inside of the dust cup.