Care of filter:
A severely soiled or clogged filter should be thoroughly
washed with fresh tepid water.
A neutral detergent could be used if required.
To assure the best results, we recommend cleaning the filters
once a year, depending on usage.
Technical Specification
Input power :
Input voltage :
Protection class :
Power cord length:
Dust capacity :
Trouble Shooting
If you have a problem with your vacuum cleaner, consult the handy guide
below. If the vacuum cleaner is malfunctioning, do not operate it. Contact your
dealer or the nearest Sanyo Service center.
Problem
Cleaner won't run.
Suction
does
increase
cleaning out the dirt.
350-400W
220-240V , 50-60Hz
class II
4.5m
0.4L
Possible Cause
Not firmly plugged in.
No voltage in wall outlet
not
after
Filter dirty.
10
Washing
Drying
Possible Solution
Plug unit in firmly.
Check
fuse
breaker.
Clean out the filter.
or