Advertisement
CARE AND MAINTENANCE
If you have a problem with
your vacuum
cleaner, consult the handy guide
below. If the vacuum cleaner is malfunctioning,
do
not
operate
it. Contact
your dealer or the nearest Sanyo Service Cent~r.
"
Problem
Possible cause
Possible solution
(1)
Cleaner won't
1. Not firmly plugged in.
1. Plug unit in firmly.
run.
2. No voltage in wall outlet.
2. Check fuse or breaker.
3. Thermal
safety device
3. Refer to page 5 "Thermal
operated.
safety device".
Approximately
one hour
later, you can restart the
cleaner.
(2)
The dust indi-
1. Paper bag or cloth bag
1. Change throw away paper
cater moves
full.
bag or cleaning cloth
immediately
to
bag.
the red zone.
2. Filter dirty.
' 2. Clean out the filter.
(3)
Cord doesn't
1. Cord twisted or uneven.
1.
Pull out cord and rewind.
fully rewind.
SANYO
Electric Co., Ltd.
OSAKA,
JAPAN
9BF-6-Pill-00521
@
@
Printed
in Japan
Advertisement
