Download Print this page

Kuryakyn 5455 Installation Instructions

L.e.d. front turn signal inserts - black

Advertisement

Quick Links

L.E.D. FRONT TURN SIGNAL INSERTS — BLACK
THANK YOU FOR CHOOSING K
PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND PROPERTY DAM-
AGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAU-
TIONS, AND NOTICES REGARDING THE INSTALLATION, USE, AND CARE OF THIS
PRODUCT.
MAKE SURE THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
2
Bullet LED Front Two Circuit Inserts—Amber Lens/Black Bezel
1
Load Equalizer
1
Dielectric Grease
3
Wire Connectors—(Scotch Locks)
1
Installation Instructions
TOOLS SUGGESTED:
Flat Blade Screwdrivers, Test Light
STEP 1
Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface and turn off the ignition.
5455-23HD-0314
-cont.-
ϋ
RYAKYN!
THIS INDICATION ALERTS YOU TO THE FACT THAT
IGNORING THE CONTENTS DESCRIBED HEREIN CAN
RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
This indication alerts you to the fact that ignoring
the contents described herein can result in minor or
moderate potential injury.
This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality or damage the product itself
or the product to which it is being attached.
Pictures may depict different
parts. Installation is the
same.
These installation instructions contain important information.
Ensure that the end user receives this copy and is aware of its
importance for future reference.
LED circuit boards are polarity sensitive! Use a test light to
determine the polarity of the bike's wiring before connecting
the LED circuit board. Küryakyn is not responsible for damage
to the LED circuit board caused by reversed polarity.
Use a test light to verify wire functions before connecting the
LED circuit board to non-stock wiring. Küryakyn is not respon-
sible for damage to the LED circuit board caused by non-stock
wiring.
INSTALLATION
5455
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
●The product must be properly installed,
maintained and operated under
normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.'S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with your
address to: Küryakyn
454 County Road V V
Somerset, WI 54025-9031
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights
reserved.
product(s).
products.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5455 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kuryakyn 5455

  • Page 1 INSTALLATION L.E.D. FRONT TURN SIGNAL INSERTS — BLACK 5455 CUSTOMER SERVICE ϋ THANK YOU FOR CHOOSING K RYAKYN! 877.370.3604 (toll free) INSTALLATION QUESTIONS PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND PROPERTY DAM- techsupport@kuryakyn.com AGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAU- or call 715.247.2983...
  • Page 2 BIKE PREP: PIC 1 STEP 2 Refer to PIC 1. Use a flat blade screw driver to remove the lens from the stock turn signal fixtures. Set the lens aside, it will not be reused. Repeat for the other side. SLOT IN LENS STEP 3 Push the stock turn signal bulb in, turn it counter-clockwise and...
  • Page 3 CLEARING DIAGNOSTIC TROUBLE CODES (DTCs)—CAN BUS MODELS: NOTE: Before clearing any codes, confirm that the LED Turn Signal In- PIC 6 CLUTCH-SIDE (LEFT) serts illuminate and flash correctly. Refer to PICs 6, 7 and 8. To enter diagnostic mode, press and hold the trip odome- ter reset switch located on the left handlebar control, while turning the IGN ON.
  • Page 4 If the bike is not equipped with a Küryakyn controller of any sort: Use a test light or wiring schematic to locate the left and right turn signal power wires and a ground wire. Typically the easiest access is beneath the seat or behind a PIC 9 side cover.