Volume; Site To Site Calls; Connecting To An Mbt Site - MBTelehealth SX10 User Manual

Volume

Site to Site Calls

Connecting to an MBT Site

The Home screen should always be displayed prior to connecting to a site; if not, this may mean that
a previous call was not disconnected . If you do not see the Home screen, press End to disconnect
prior to connecting to your site .
Tap Call.
TIP
If you call the same sites from the same equipment you can save the contact
to the favourites list on that equipment . The next time you need to call the site,
tap Call, and then tap Favorites to locate the site rather than scroll through the
entire address book .
MBTelehealth - SX10/20 with Touchpad10 User Guide
Adjust the Volume
Press and hold the left side of the Volume button to decrease the volume and the
right side to increase the volume .
Connect to an MBT Site
Tap in the search/dial field to invoke
the keypad and type in the 5 digit
number .
(Note: Tap the keypad icon
the bottom left corner of the screen if
required .)
Tap Call to connect .
Tap End to disconnect .
... ...
... . in
Page 9 of 19