Overview - MBTelehealth SX10 User Manual

OVERVIEW

This user guide will provide you with an overview and the knowledge to setup and use the SX Series
videoconference solution and the Touchpad 10 .
The main components included with the SX Series and Touchpad 10 are the Camera, Codec, Ethernet
Cable, Microphone, Screen/Monitor and Touchpad . In some instances there may also be a router .
Your equipment will either be an SX20 or an SX10, however they use the same software so they
function the same way .
Touchpad 10:
navigate screens and select options . It controls
all functions of the videoconferencing equipment,
including moving the camera .
Camera: high quality imaging device which
transmits images to the screen/monitor . The
camera movements are controlled by a wireless
infra-red (IR) remote control that controls a
variety of functions, both on the near and far end .
Codec: central part of the videoconferencing
equipment . The main task of the codec is the
compression of outgoing video, audio and data,
the decompression of the incoming information
and the transmission of this information between
endpoints . The name codec comes from a
combination of the two words compression and
decompression .
Screen/Monitor:
end or the near end image and content as selected by the
user .
MBTelehealth
Main Components
used to place calls, adjust the volume,
built-in screen/monitor displays the far
- SX10/20 with Touchpad10 User Guide
SX20
SX20
SX10
Camera
The camera and codec on
the SX10 is a combined unit.
SX10
Codec
The camera and codec on
the SX10 is a combined unit.
Page 3 of 19