Advance; Program Entry - Timeguard FSTWiFi Installation & Operating Instructions Manual

Advance

• Advance changes the output state until the next
programmed change.
Note: The display will show the next program change:
• The time of the next programmed change is shown on the device
home screen. It also shows the boost time in boost mode (see above).
13

Program Entry

• The App supports multiple programmed times, with an easy repeat
function for different days. Up to 6 times can be added to a program
set if required (using the plus key).
• Time entry is programmed via the program key on the device
home page. Hold the chosen time down to edit the times, hold
the day MTWTFSaSu to change repeats, or hold the left side of
the time box to delete the entire program set via the confirm button.
• The default times are 06:00 to 08:00, and 18:00 to 20:00 every day.
• Times can be programmed across midnight. Enter a start and end time
before midnight. Enter a second set of times after midnight. Turn off
the first end time and second start time using the green sliders.
Set the repeats.