DirectOut Technologies EXBOX.64 User Manual page 21

4.
Connect signal cable(s) for the MADI signals.
5.
Using the power cord of the external power
supply provided, connect the device to a
matching power supply and connect the
output of the power supply to the Hirose
connectors at the rear panel.
This device may operate with only one power
supply. To provide power supply redundancy, it is
recommended to connect both PSU 1 and PSU 2 to
independent power supplies with separate fuses.
NOTE
The shipment includes one external power supply
unit. Additional power supply units are available from
your local DirectOut representative.
EXBOX.64 Manual - Version 2.0
Chapter 3: Installation
page 21 of 40