Table of Contents
Advertisement
Chapter 3: Installation
Installing the Device
1.
Open the packaging and check that the
contents have been delivered complete and
undamaged.
2.
Place the device on a non-slip horizontal
surface. The delivered pads may be affixed to
the bottom of the cabinet. Ensure a clean and
dry surface before affixing the pads.
WA R NING
The synthetics of the delivered pads might cause
stains on damageable surfaces. To avoid staining
of furniture surfaces it is recommended to place a
protective plate under the device.
WA R NING
Avoid damage from condensation by waiting for the
device to adapt to the environmental temperature.
Proper operation can only be guaranteed between
temperatures of 5º C and 45º C and a maximum
relative humidity of 80%, non-condensing.
Ensure that the unit has sufficient air circulation for
cooling.
EXBOX.64 Manual - Version 2.0
Chapter 3: Installation
page 19 of 40
Advertisement
Table of Contents
Need help?
Do you have a question about the EXBOX.64 and is the answer not in the manual?