Advanced Setup; Tcp/Ip - Sanyo XG-705A Owner's Manual

6. Configurations with Browser

Advanced Setup

TCP / IP
TCI/IP related items can be configured on
this screen.
Parameter
IP Configuration Method ........
IP Address ......................................Set the IP address in the environment you wish to use. If "IP configuration
Subnet Mask ..........................Set the Subnet mask in the environment you wish to use. If "IP
Gateway Address ............................Set the gateway address in the environment you wish to use.
ARP+PING ......................................Select "Enable" or "Disable" the IP address setup using "arp" and "ping"
Domain................................................Enter the domain name where the projector belongs to (up to ASCII 254
DNS Server......................................Enter the address of the DNS server.
APPLY button ..................................Click the APPLY button to update. The screen to restart the projector will be
REFRESH button ............................Update and show the adjusted data.
RESTORE Factory Default
Settings button ..........Restore the settings to the values at the factory.
46
(Click "+" mark to display the subitems.)
Description
A desired IP address setup method is selected from "Manual",
"DHCP", and "BOOTP".
If "DHCP" or "BOOTP" is selected, the IP address is obtained
automatically as "DHCP client" or "BOOTP client". At this time, it is
necessary that the DHCP server/BOOTP server must be in the
environment allowing the network communication.
IP Address, Subnet Mask, and Gateway Address fields will be displayed
"-.-.-.-", when the IP Address Configuration Method is set to DHCP or
BOOTP and failed to get the figures from the DHCP server, the
computer cannot be connected to the projector.
If the projector fails to obtain IP address from BOOTP server, the
existing IP address will be assigned.
Method" is set to "DHCP" or "BOOTP", this setting is not needed.
Configuration Method" is set to "DHCP" or "BOOTP", this setting may
become unnecessary depending on the settings of "DHCP Server" and
"BOOTP Server".
If "IP Configuration Method" is set at "DHCP" or "BOOTP", this
setting may become unnecessary depending on the settings of "DHCP
Server" and "BOOTP Server". If any segment beyond the router is not
used, the gateway address can be remained
(Refer to page 96 for details.)
characters).
displayed.
" "
255.255.255.255 .