Projecting The Image - Sanyo XG-705A Owner's Manual

Network set-up and operation

Table of Contents

9. How to Use Network Viewer

Projecting the Image

Operation can be made with any of 1) PJ Controller, 2) Browser, or 3) Projector.

When operating with the projector, first, set the FTP server which provides images with 1) PJ

Controller or 2) Browser.

Operate as follows.

1) Operating with the PJ Controller

1. Select the projector input (Wired /Wireless).

Select "Wireless" for Wireless LAN and "Wired" for Wired LAN for the input source of the

projector. Activate "NetworkModule Client" or "NetworkModule Moderator".

Detected projector names and IP addresses will be displayed.

2. Specify the projector to display the image.

Only one projector can be selected.

3. Click the PJ Controller button to display the PJ Controller screen. First, make "Initial Setting"

from the main menu. Refer to "10. How to Use PJ Control" ➔ "Initial Settings" (p.75).

4. Select Network Viewer from the Main Menu. Operation window (next page) will be displayed.

Network Viewer

[Network Viewer]

Select the

projector.

PJ Controller

button

Table of Contents