Service
Items on this screen are used for maintenance of the projector.
Save Actual Adjustment
On this screen, you can save and load the setting. The items you can save are as follows: Input,
PC adjustment, System Adjustment, Image Adjustment, Screen and Setting.
✳
The figure shows only a part of the full screen.
10. How to Use the PJ Controller
Parameter
Description
Video System ......Display the current video system.
Horizontal ..........Click 7 8 buttons to adjust horizontal
screen size.
Vertical ............Click 7 8 buttons to adjust vertical
screen size.
Position............Click 7 8ed buttons to adjust the
screen position.
Initialize ..............Reset all the service items to the factory
default settings.
✳
If you select Wired, Wireless Computer1 (Analog/Digital)
or Computer 2 (RGB) for the input source, these items
are not shown and "No items are shown in the current
input mode" will be displayed.
1. Confirm the actual adjustment
When you click Save icon in the Control Menu,
the "Save Actual Adjustment" screen will
appear. Check each setting. (Go to the next
page.)
87