Table of Contents
Advertisement
4. Wired LAN Configurations
User PIN Code
The User PIN code is to restrict the access from the networks to the projector.
After setting the User PIN code, you need to enter it to operate the projector via the networks.
1. Select User PIN code, and press the SELECT button.
The User PIN code screen will appear.
2. Set the User PIN code.
Set the figures with the Point ed buttons and move to the next items with the Point 7
8buttons. Select "Set" and press the SELECT button to set. To cancel the preset User PIN
code, select "Cancel". When you do not want to set the User PIN code, set
It is recommended to set the User PIN code if you use the projector via the networks. You can
also change the User PIN code. See "6. Configurations with Browser" ➔ "Advanced Setup" ➔
"User PIN code" (p.50).
Wired Information
Select Wired information from the projector menu and press the SELECT button to show LAN
setting environment of the currently selected projector. (The description below is an example
and different from what will be shown.)
Wired Factory Default
Return all the Wired LAN settings to the factory default settings which are shown on the next
page.
30
User PIN code
Wired information
Wired Factory Default
(See the menu above.)
NetworkModule Information
MAIN PROGRAM :
BOOT PROGRAM :
MAC ADDRESS :
IP ADDRESS :
SUBNET MASK :
GATEWAY ADDRESS :
IP CONFIGURATION :
ARP + PING :
CONNECTED PC :
(See the menu above.)
User PIN code screen
xxxxx
xxxxx
08007B650056
172.21.95.202
255.255.255.0
172.21.95.1
Manual
Enable
(None)
"
"
0000
.
Advertisement
Table of Contents
