Initial Settings - Sanyo XG-705A Owner's Manual

Initial Settings

Before using the PJ Controller function, initial setting is required.
1. Select Initial Setting from the main menu and configure each item.
Parameter
Language ........................................Select a desired language from the pull-down menu, and click "Set".
Temperature ................................Set the unit of temperature displayed on the control screen of the
Comment ........................................You can store any comments regarding the initial settings. To save the
Description
projector. Select "Centigrade" or "Fahrenheit" from the pull-down
menu and click "Set".
comments you entered, click "Save".
10. How to Use the PJ Controller
75