VTech VM342-2 Quick Start Manual

Go to www.vtechphones.com VM342-2
for the latest VTech product news.
Quick start guide
Connect and power on - Baby unit
Change different views
In SINGLE-CAM or PATROL mode, press VIEW to switch between the image of baby units and
.
Press VIEW
What's in the box
Positioning - Baby unit Install the battery
>
3ft (1m)
Change different views - PATROL
Select PATROL as your monitoring mode to alternately view the image from baby units and every 10
seconds.
10s
VM342 baby monitor system
Baby's room
Connect and power on - Parent unit
THIS SIDE UP
＞3ft (1m)
•
＜3ft (1m)
Change different views - SPLIT
Select SPLIT as your monitoring mode to view the images from both
baby units at once.
Install the lens (optional)
The wide-angle lens (VM101) provided allows you to view If you do not use the lens at the moment, cover both
more of your baby's room from the parent unit screen.
sides of the lens with the lens covers provided to avoid
scratches.
5
Status check
Once you power on both your baby units and parent unit, your parent unit displays image from the baby unit, and
the LINK LED light turns on.
Long press
If you are viewing baby unit , the ON/OFF LED light of baby unit
its ON/OFF LED light flashes.
CAUTION
The default volume of your parent unit is
level 4, the maximum volume is level 7.
If you experience high-pitched screeching
noise from your baby monitor while
positioning:
- Make sure your baby unit and parent unit
are more than 1 meter (3 feet) apart, OR
- Turn down the volume of your parent unit.
Sound activation
Automatically turns on the parent unit screen when the
baby unit detects a sound after the screen is turned off.
When no sound is detected within 50 seconds, the screen is
automatically turned off to save power.
Living room
turns on. As baby unit is not being viewed,
Sound-activated Screen
On
O