VTech VM5251 Quick Start Manual

What's in the box
VM5251
Go to www.vtechphones.com
to register your product for enhanced
VM5251-2 VM5251
warranty support and the latest VTech
product news.
Full Color Video Monitor
Quick start guide
1
Install the battery
2
Connect the baby monitor
VM5251-2 NOTE NOTES
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to a switch-controlled electric outlet.
• Connect the power adapters in a vertical or floor mount position only. The adapters' prongs are not
designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table,
or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby units and the power adapter cords are out of reach of children.
3
Power on or off the baby monitor
Slide the ON/OFF switch to power
on or off your baby unit.
THIS SIDE UP
4
Positioning the baby monitor
>
3ft (1m)
Caution
• The default volume of your parent
unit is level 4, and the maximum
volume is level 7. If you experience
high-pitched screeching noise from
your baby monitor while positioning:
- Make sure your baby unit and parent
unit are more than 3 feet (1 meter)
apart, OR
- Lower the volume of your parent unit.
5
Status check
Press and hold POWER to power on Once you power on both your baby unit and parent unit, your parent unit displays image
or off your parent unit. from the baby unit, and the LINK LED light turns on.
Long press Long press
The ON/OFF LED light of baby unit turns on.
Powering on ··· Powering off ···
Basic operation - Parent unit
Adjust speaker volume Zoom
>
> 3ft (1m)
3ft (1m) Press / to adjust your parent Press to zoom in or out.
unit speaker volume. Even if you have
set the parent unit volume to the
maximum, you may not hear sound from
< < 3ft (1m)
3ft (1m) the baby unit. It depends on the sound
sensitivity setting.
Talk to your baby unit Use the menu
Press and hold TALK and speak to your Press to enter the menu, choose a menu
parent unit. Your voice is transmitted to item, or save a setting. You can use the parent
the baby unit. unit for advanced settings or operations,
such as to play or stop the baby unit lullaby,
or to adjust the baby unit sound sensitivity.
While in the menu:
• Press or to scroll among the menu
options.
• Press or to select an item.
• Press to return to the main menu or idle
screen.
Press and hold
Turn off the screen Turn off the parent unit
Press and hold LCD ON/OFF to switch off Press and hold POWER to power off
the screen. You can still hear sound from the your parent unit.
baby unit.
Long press
Long press
Tip
• Press any keys on the parent unit to turn on
the screen again.
Overview - Parent unit
POWER
Antenna
Microphone
TALK
Speaker
Arrow keys
LED lights
MENU/SELECT
Zoom Stand
VIEW /LCD ON/OFF
Power jack
Battery compartment
Volume
cover