VTech VM342-2 Quick Start Manual

Go to www.vtechphones.com VM342-2
to register your product for
enhanced warranty support
and latest VTech product news.
Quick start guide
Connect and power on - Baby unit
Change different views - View
Press to switch between the image of baby units and .
Press
What's in the box
Install the battery
>
1m (3ft)
Change different views - Patrol
Press to alternately view the image from baby units and every 10 seconds.
10s
VM342-2 baby monitor system
Baby's room
Connect and power on - Parent unit
2s
>
1m (3ft)
CAUTION
• The default volume of your parent unit
is level 4. If you experience high-pitched
screeching noise from your baby monitor
while positioning:
<
1m (3ft)
- Make sure your baby units and parent unit
are more than 1 meter (3 feet) apart, OR
- Turn down the volume of your parent unit.
Change different views - Split
Press to view the images from all baby units at once.
Living room
Status check
Once you power on your baby monitor, your parent unit displays image from baby unit , and the
light turns on.
The LED light of baby unit turns on. As baby unit is not being viewed, its LED light flashes.
Dim mode
With dim mode preset to on, your parent unit display will dim after 10 minutes of inactivity to conserve energy.
10 min inactivity
Press any buttons
Install the lens (optional)
The wide-angle lens ( ) provided allows you to view If you do not use the lens at the moment, put
more of your baby's room from the parent unit screen. the lens cover on the lens to avoid scratches.
LED