Connecting Projector; Terminals Of Projector - Sanyo PLV-75/PLV-80 Owner's Manual

CONNECTING PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on
pages 12 to 14 and connect properly.
AUDIO INPUT 1 JACK
Connect an audio output
(stereo) from computer to
this jack.
(Refer to P13.)
RESET BUTTON
This projector uses a micro processor
to control this unit, and occasionally,
this micro processor may malfunction
and need to be reset. This can be
done by pressing RESET button with a
pen, which will shut down and restart
unit. Do not use RESET function
excessively.
5 BNC INPUT JACKS
Connect component video
output (Y, Cb, Cr or Y, Pb, Pr)
from video equipment to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks or connect computer
output {5 BNC Type (Green,
Blue, Red, Horiz. Sync and
Vert. Sync.)} from computer
to G, B, R, H/V and V jacks.
(Refer to P13 and 14.)
12

TERMINALS OF PROJECTOR

INPUT TERMINAL (ANALOG)
Connect computer output
(Analog HDB 15 pin type)
to this terminal.
(Refer to P13.)
ANALOG
AUDIO 1
G
VIDEO/Y
VIDEO/Y Cb/Pb
VIDEO INPUT JACKS
Connect composite video
output from video equipment
to VIDEO/Y jack or connect
component video outputs to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks. (Refer to P14.)
INPUT TERMINAL (DIGITAL)
Connect computer output
(Digital DVI-D type) to this
terminal.
HD (HDCP Compatible) signal
can also be connected.
(Refer to P13.)
INPUT 1
DIGITAL(DVI-D)
R/C JACK
CONTROL PORT
RESET
AUDIO 2
B R H/V V
Cb/Pb Cr/Pr
INPUT 2
S–VIDEO
Cr/Pr
R–AUDIO–L
( MONO )
INPUT 3
AUDIO INPUT JACKS
Connect an audio output
from video equipment to
these jacks.
(Refer to P14.)
AUDIO INPUT 2 JACK
Connect an audio output
(stereo) from computer to
this jack.
(Refer to P13.)
R/C JACK
When using Wired/Wireless
Remote Control Unit as Wired
Remote Control, Connect
Wired Remote Control Unit to
this jack with Remote Control
Cable (not supplied).
CONTROL PORT CONNECTOR
When controlling the projector
from a computer, connect the
computer to this connector
with a control cable. (Refer to
P13.)
S-VIDEO INPUT JACK
Connect S-VIDEO
output from video
equipment to this
jack. (Refer to P14.)