Picture Screen Adjustment; Picture Screen Select - Sanyo PLV-75/PLV-80 Owner's Manual

COMPUTER INPUT
This projector has a picture screen resize function, which enables you to display desirable image size.
Select picture screen among Normal, Full and True by pressing
SCREEN button on Remote Control Unit.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SCREEN Menu icon.
2 Press POINT UP/DOWN buttons and move a red frame pointer to
function that you want to select and then press SELECT button.
Normal
Provides image to fit the panel size of the screen.
Full
Provides image to fit the horizontal size of the screen.
True
Provides image in its original size. When the original image size is
larger than screen size (1366 X 768), this projector enters "D. Zoom
+" mode automatically.
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message "D. Zoom +" is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when image
is larger than screen size.
A projected image can be also expanded by pressing D.ZOOM and
SELECT button on Remote Control Unit.
Digital zoom –
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message "D. Zoom –" is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
and SELECT button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM,
SELECT and POINT buttons.
30

PICTURE SCREEN ADJUSTMENT

PICTURE SCREEN SELECT (DIRECT)
PICTURE SCREEN SELECT (MENU)
SCREEN button
Normal
Full
True
SCREEN MENU
SCREEN Menu icon
Move a red frame pointer to function
and press SELECT button.
NOTE
● Picture screen adjustment can not be operated
when "720p (HDTV)", "1035i (HDTV)" or "1080i
(HDTV)" is selected on PC SYSTEM Menu (P25).
● True and Digital zoom +/- can not be selected
when "480i", "575i", "480p" or "575p" is selected on
PC SYSTEM Menu (P25).
● This projector cannot display any resolution higher
than 1600 X 1200. If your computer's screen
resolution is higher than 1600 X 1200, reset
resolution to lower before connecting projector.
● Image data in other than XGA (1024 x 768) is
modified to fit screen size in initial mode.
● Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.