Top Controls And Indicators - Sanyo PLV-75/PLV-80 Owner's Manual

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
LAMP REPLACE INDICATOR
Turns to yellow when
life of projection lamp
draws to an end.
Flashes yellow when
the lamp cannot light
up. (P46, 53-54)
MENU BUTTON
Used to open or close
MENU operation. (P18,
19)
ZOOM BUTTON
Used to adjust zoom.
(P22)
FOCUS BUTTON
Used to adjust focus.
(P22)
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P22)
WARNING TEMP. INDICATOR
Flashes red when
internal projector
temperature is too
high. (P44, 53-54)
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust value
in ON-SCREEN MENU. They are also
used to pan image in DIGITAL ZOOM
mode. (P30)
+/–
POINT LEFT/RIGHT buttons are also
used as VOLUME +/– buttons. (P23)
READY INDICATOR
Lights green when a
Becomes dim when a
projector is ready to be
projector is turned on.
turned on. And it
And bright when a
flashes green in Power
projector is in stand-by
Management mode.
mode. (P20, 21, 53-54)
(P40, 44, 53-54)
SELECT BUTTON
Used to execute the
selected item.
It is also used to
expand/compress image
in DIGITAL ZOOM mode.
(P30)
BEFORE OPERATION
LAMP INDICATOR
POWER ON–OFF BUTTON
Used to turn a projector
on or off. (P20, 21)
INPUT BUTTON
Used to select input
source. (P24, P31)
AUTO PC ADJ. BUTTON
Used to operate AUTO
PC Adjustment function.
(P26)
IMAGE BUTTON
Used to select image
level. (P29, 33)
17