Adjusting Screen; Zoom Adjustment; Focus Adjustment; Lens Shift Adjustment - Sanyo PLV-75/PLV-80 Owner's Manual

BASIC OPERATION
Press ZOOM button on Top Control or ZOOM ▲/▼ button on
1
Remote Control Unit. Message "Zoom" is displayed.
Press ZOOM ▲ button or POINT UP button to make image
2
larger, and press ZOOM ▼ button or POINT DOWN button to
make image smaller.
Press FOCUS button on Top Control or FOCUS ▲/▼ button on
1
Remote Control Unit. Message "Focus" is displayed.
Adjust focus of image by pressing FOCUS ▲/▼ button or
2
POINT UP/DOWN buttons.
NOTE;
Focus adjustment may not function properly if the image is
corrected by KEYSTONE adjustment.
Press LENS SHIFT button on Top Control or LENS SHIFT ▲/▼
1
button on Remote Control Unit. Message "Lens shift" is
displayed.
Press POINT UP button or LENS SHIFT ▲ button to move
2
image up, press POINT DOWN or LENS SHIFT ▼ button to
move image down.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 38.) Keystone
dialog box appears.
2
Correct keystone
UP/DOWN/LEFT/RIGHT buttons. Press POINT UP button to
reduce the upper part of the image, and press POINT DOWN
button to reduce the lower part. Press POINT LEFT button to
reduce the left part, and press POINT RIGHT button to reduce
the right part.
Reduce the upper width
with POINT UP button.
22

ADJUSTING SCREEN

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

distortion by pressing
Reduce the lower width
with POINT DOWN button.
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Message disappears after 4 seconds.
POINT
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum
correction.
• If you press the KEYSTONE button on Remote
Control Unit once more while the keystone
dialog box is being displayed, the keystone
adjustment will be canceled.
Reduce the left part with
POINT LEFT button.
Reduce the right part with
POINT RIGHT button.