Cisco NCS 4000 Series Hardware Installation Manual page 10

Mounting the Chassis
Preparing the Rack for Chassis Installation
To bolt the rack to the floor, a floor bolt kit (also called an anchor embedment kit ) is required. For information
on bolting the rack to the floor, consult a company that specializes in floor mounting kits. Make sure that floor
mounting bolts are accessible, especially if annual re-torquing of bolts is required.
Figure 4: Single NCS 4016 Chassis Mounted in Rack
Before you move the chassis or mount the chassis into the rack, we recommend that you do the following:
Hardware Installation Guide for the Cisco NCS 4000 Series
8