Cisco NCS 4000 Series Hardware Installation Manual page 27

Mounting the Chassis
Figure 21: Chassis Mounting Hardware Ready for Rack Mounting
Prerequisites
• Make sure that the rack is level and bolted to the floor.
• Make sure that the mounting brackets are installed on the chassis.
• Make sure that the aid brackets are installed on the rack.
Tools and Equipment
• Number 2 Phillips screwdriver
• Mechanical lifting device, such as a scissor lift or other suitable lifting device
• NCS 4016 installation kit, shipped with the chassis, contains installation aid brackets and screws (Cisco
PID NCS4K-INST-KIT=)
Hardware Installation Guide for the Cisco NCS 4000 Series
Mounting the Chassis into a Rack
25