Cisco NCS 4000 Series Hardware Installation Manual page 46

Installing a Route Processor, Fabric Card, or Line Card
Figure 33: Attaching the Vertical Cable Management Bracket
1 Light gray arm
Step 11
In NCS 4009, to install the auxiliary fan tray (AFT) in the NCS4009-FC2F-S card, slide the AFT into the
frame of the fabric card. The connector on the fabric card holds the AFT firmly to the card.
Step 12
Push the sliding handle to its original position.
Step 13 Tighten the screws on the AFT using 5.75 pound/force (lbf) inch (0.65 Nm torque).
Hardware Installation Guide for the Cisco NCS 4000 Series
44
2 Dark gray arm
Installing Route Processor Cards, Fabric Cards, and Line Cards