Digisol DG-BG4300NU User Manual page 64

Fragment treshold
RTS Treshold
Beacon Interval
DTIM Interval
Data Rate
P reambleType
Broadcast SSID
Relay Blocking
Ethernet to Wireless
Blocking
 In Shared key, the wireless client connects to the router using the
shared key.
 The default is set to Auto, which allows either Open System or
Shared Key authentication to be used.
This value should remain at its default setting of 2346. It specifies the
maximum size for a packet before data is fragmented into multiple packets.
If you experience a high packet error rate, you may slightly increase the
" Fragment Threshold" value within the value range of 256 to 2346. Setting
this value too low may result in poor network performance. Only minor
modifications of this value are recommended .
This value should remain at its default setting of 2347. If you encounter
inconsistent data flow, only minor modifications are recommended. If a
network packet is smaller than the preset " RTS threshold" size, the
RTS/CTS mechanism will not be enabled.
The Beacon Interval value indicates the frequency interval of the beacon.
Enter a value between 20 and 1024.
Data beacon proportion (transmission quantity indication). Its value range is
1-255 and the default value is 100.
Choose the transmission rate of the wireless data.
You can choose Auto, 1 M, 2 M, 5.5 M, 11 M, 6 M, 9 M, 12 M, 18 M, 24
M, 36 M, 48 M, 54M, MSC0 ~ MSC15.
 Long P reamble: It means this card always uses long preamble.
 Short P reamble: It means this card can support short preamble
capability.
Select whether the router broadcasts SSID or not. You can select Enable or
Disable.
 Select Enable, the wireless client searches the router through
broadcasting SSID.
 Select Disable to hide SSID, the wireless clients cannot find the SSID.
Wireless isolation. Once this field is Enabled, the wireless clients that are
connected to the router cannot intercommunicate.
Whether the wireless network can communicate with the Ethernet network
or not.
64
DG-BG4300NU Use r Manual