Digisol DG-BG4300NU User Manual page 58

The following table describes the parameters of this page:
Field
Band
Mode
SSID
Channel Width
Control Sideband
Channel Number
Radio Power (P ercent)
Show Active Clients
Apply Changes
Choose the working mode of the router. You can choose from drop -down list.
Choose the network mode of the router, which varies accordin g to the software.
By default, the network model of the router is AP.
The service set identification (SSID) is a unique name to identify the router in
the wireless LAN. Wireless stations associating to the router must have the
same SSID. Enter a descriptive name that is used when the wireless client is
connecting to the router.
Options available are 40 MHZ, 20 MHz and 40/20 MHz
There are two sidebands upper and lower bands. The lower band comprises of
channel numbers 1-7. The upper band comprises of channel numbers 5 -11.
A channel is the radio frequency used by 802.11b/g/n wireless devices. There
are 11 channels (from 1 to 11) available depending on the geographical area.
When You may have a choice of channels (for your region) you should use a
different channel from an adjacent AP to reduce the interference and degrading
performance occurs when radio signal from different APs overlap. Choose a
channel from the drop-down list box.
You can choose the transmission power of the radio signal. The default one is
100%. It is recommended to choose the default value 100%.
Click it to view the information of the wireless clients that are connected to the
router.
Click it to apply the settings.
58
DG-BG4300NU Use r Manual
De scription