D&H DH05C User Manual page 47


Activate the reversion of the driving direction for confirmation.
Then the locomotive is flashing again.

You may now enter further CVs in long mode which you want to change.
The long mode can be left by switching the track voltage off and on again or by STOP.
SUSI-mode
You gain the SUSI-mode by writing value 09 in CV09 in short mode.
The decoder confirms that by slow flashing.
Enter CVs respective the related values as in long mode and reduce all CVs about 900. Thus changes CV903 to 003
for example.
Notice please that you are operating in SUSI-mode, which is programmed according to the long mode.
Notice:
It is easier to do the programming under DCC.
Thus programmed values are also valid for MM-format.
47