D&H PD05A Manual
  1. Manuals
  2. Brands
  3. D&H Manuals
  4. Media Converter
  5. PD05A
  6. Manual

D&H PD05A Manual

Hide thumbs Also See for PD05A:
Table of Contents

Advertisement

Quick Links

Locomotive decoder
DH05C
DH10C
DH14B
DH16A
DH18A
DH21A
DH22A
BA DH engl FW3_12 Druck.indd 1
BA DH engl FW3_12 Druck.indd 1
Doehler & Haass
Locomotive decoder
Locomotive function decoder
PD05A
PD06A
PD12A
PD18A
PD21A
Locomotive function decoder
FH05B
FH18A
FH22A
10.05.21 14:26
10.05.21 14:26

Advertisement

Table of Contents
loading

Related Manuals for D&H PD05A

Summary of Contents for D&H PD05A

  • Page 1 Doehler & Haass Locomotive decoder Locomotive function decoder Locomotive decoder Locomotive function decoder DH05C PD05A FH05B DH10C PD06A FH18A DH14B PD12A FH22A DH16A PD18A DH18A PD21A DH21A DH22A BA DH engl FW3_12 Druck.indd 1 BA DH engl FW3_12 Druck.indd 1 10.05.21 14:26...

  • Page 2: Table Of Contents

    Support and help ............................ 5 Locomotive decoder DH05C / DH10C / DH14B / DH16A / DH18A / DH21A / DH22A / PD05A / PD06A / PD12A / PD18A / PD21A ..................6 Functions ..............................20 5.1.1 Limitations of the PD series compared to our DH decoder series ............21 Installation of the decoder ........................
  • Page 3 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder Contents ab Firmware-Version 1.11 from firmware version 3.12 System format DCC ........................... 35 Functions ............................. 35 Setting options ............................. 36 8.2.1 List of supported CV ..........................37 Operation ............................. 51 System format Märklin-Motorola (MM) ................see internet* Functions ..............................

  • Page 4: Introduction

    DH05C, DH10C, DH14B, DH16A, DH18A DH21A, DH22A FH05B, FH18A FH22A PD05A PD06A PD12A, PD18A, PD21A Our decoders can be used for normal direct current motors as well for coreless motors. The operation on alternating current supplied layouts with switching impulse is not allowed! The switching impulse destroys the decoder (exception: DH21A, DH22A and FH22A)! The operation of inductive consumers (decouplers, relays, etc.) requires the connection of freewheeling diodes...

  • Page 5: Safety Instructions

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 2 Safety instructions This product is not suitable for children under 14 years. It might be swallowed by children under 3 years! An improper use involves a risk of injury due to sharp edges and points. 3 Warranty The functioning of every decoder is fully tested before delivery.

  • Page 6: Locomotive Decoder Dh05C / Dh10C / Dh14B / Dh16A / Dh18A / Dh21A / Dh22A / Pd05A / Pd06A / Pd12A / Pd18A / Pd21A

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 5 Locomotive decoder DH05C (2 generation) Specifi cations DH05C Dimensions [mm] after publication Total load 0,5 A Maximum motor current 0,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 7 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 DH10C (2 generation) Specifi cations DH10C Dimensions [mm] 12,7 x 8,9 x 1,4 Total load 1,5 A Maximum motor current 1,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 8 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 DH14B Specifi cations DH14B Dimensions [mm] 18,5 x 9,2 x 1,7 Total load 1,0 A Maximum motor current 1,0 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 9 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 DH16A (2 generation) Specifi cations DH16A Dimensions [mm] after publication Total load 1,5 A Maximum motor current 1,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 10 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 DH18A (2 generation) Specifi cations DH18A Dimensions [mm] 9,7 x 8,9 x 2,8 Total load 1,5 A Maximum motor current 1,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 11 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 DH21A (2 generation) Specifi cations DH21A-0/2/3/4 DH21A-5 Dimensions [mm] 20,7 x 15,8 x 5,2 20,7 x 15,8 x 5,2 Total load 2,0 A 2,0 A Maximum motor current 2,0 A 2,0 A Maximum operating voltage...
  • Page 12 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 DH21A (2 generation) 21 pin interface M1, M2 ....Motor connection 1, 2 G1, G2 ....Track connection 1, 2 GPIO LV, LR ....Front light, rear light (each 150 mA) AUX1, AUX2 ..
  • Page 13 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 DH22A (2 generation) Specifi cations DH22A Dimensions [mm] 20,7 x 15,8 x 5,2 Total load 2,0 A Maximum motor current 2,0 A Maximum operating voltage 30 V Switching voltage at AC analog: Max.
  • Page 14 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 DH22A (2 generation) PluX22 interface M1, M2 ....Motor connection 1, 2 G1, G2 ....Track connection 1, 2 GPIO AUX3 LV, LR ....Front light, rear light (each 150 mA) ZCLK ZDAT AUX1, AUX2 ..
  • Page 15 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 PD05A (2 generation) Specifi cations PD05A Dimensions [mm] 5,2 x 8,0 x 2,5 Total load 0,5 A Maximum motor current 0,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable)
  • Page 16 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 PD06A Specifi cations PD06A Dimensions [mm] 6,8 x 11,4 x 2,8 Total load 0,5 A Motor voltage Maximum motor current 0,2 A Maximum operating voltage 18 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 17 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 PD12A Specifi cations PD12A Dimensions [mm] 24,2 x 11,0 x 2,4 Total load 1,0 A Maximum motor current 1,0 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs: AUX1, AUX2 (dimmable) each 300 mA...
  • Page 18 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 PD18A Specifi cations PD18A Dimensions [mm] 23,8 x 10,8 x 2,0 Total load 1,0 A Maximum motor current 1,0 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) je 150 mA Function outputs: AUX1, AUX2 (dimmable) je 300 mA...
  • Page 19 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 PD21A Specifi cations PD21A Dimensions [mm] 21,2 x 15,5 x 2,9 Total load Maximum motor current Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Connecting options PD21A-4...

  • Page 20: Functions

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 5.1 Functions • Operation can be controlled either by conventional DC command stations or by digital central units supporting the formats SelecTRIX 1 and 2, NMRA standard (DCC) or MM1/MM2 standard •...

  • Page 21: Limitations Of The Pd Series Compared To Our Dh Decoder Series

    ® 5.1.1 Limitations of the PD series compared to our DH decoder series The PD05A nano locomotive decoder is an especially small vehicle decoder for SX1, SX2 and DCC operation. • No support for MM and DC-analog operation modes • No support of SX1 programming (but SX1 operation is possible through SX2 parameter programming) •...

  • Page 22: Installation Of The Decoder

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 The PD06A vehicle decoder for miniature motors is our particularly small vehicle decoder for SX1, SX2 and DCC operation. • No support for MM mode • No support of SX1 programming (but SX1 operation is possible through SX2 parameter programming) •...

  • Page 23: Connection Of The Decoder

    In case your locomotive is equipped with an interface according to NEM 651, you should take the decoder DH05C-1, DH10C-1, DH10C-2 or PD05A-1. They have already the appropriate connections for this plug. Short the ribbon cable up to 5 mm and remove the rest of insulation. The decoder can be inserted into the interface without any problem now.
  • Page 24 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Variants with interfaces: In case your locomotive is equipped with a 12 pin interface (PluX12), you should take the decoder PD12A-4. They have already the appropriate connections for this plug. The decoder can be inserted into the interface without any problem now.
  • Page 25 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 For above variant 9 connect the decoder wires according to the following diagram (see also graphic below): red wire ....with the right track wire black wire ....with the left track wire orange wire ....with the motor wire, which was connected to the right track wire gray wire ....with the motor wire, which was connected to the left track wire white wire ....with the front light in driving direction...

  • Page 26: Check After Installation

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 The wires of an additionally connected SUSI module are connected according to the following scheme: red wire ......SUSI supply voltage (ZVS) blue wire ....... SUSI clock (ZCLK) gray wire ....... SUSI data (ZDAT) black wire .....

  • Page 27: Locomotive Function Decoder Fh05B / Fh18A / Fh22A

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 6 Locomotive function decoder FH05B (2 generation) Specifi cations FH05B Dimensions [mm] after publication Total load 0,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs AUX1, AUX2 (dimmable) each 300 mA...
  • Page 28 Notes FH18A (2 generation) Specifi cations FH18A Dimensions [mm] 9,7 x 8,9 x 2,8 Total load 1,5 A Maximum operating voltage 30 V Function outputs for light: LV, LR (dimmable) each 150 mA Function outputs AUX1, AUX2 (dimmable) each 300 mA Function outputs AUX3, AUX4, AUX5, AUX6 unamplifi ed *) With SUSI interface (if AUX3/AUX4 deactivated)
  • Page 29 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from fi rmware version 3.12 FH22A FH22A Specifi cations Dimensions [mm] 16,1 x 15,8 x 3,3 Total load 2,0 A Maximum operating voltage 30 V Switching voltage at AC analog: Max. 45 V peak = 30 V eff. LV, LR (dimmable) each 150 mA AUX1, AUX2 (dimmable)
  • Page 30 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 FH22A PluX22 interface G1, G2 ....Track connection 1, 2 LV, LR ....Front light, rear light (each 150 mA) GPIO AUX3 AUX1, AUX2 ..Additional function 1, 2 (each 300 mA) ZCLK ZDAT AUX3, AUX4 ..

  • Page 31: Functions

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 6.1 Functions • Operation can be controlled either by conventional DC command stations or by digital central units supporting the formats SelecTRIX 1 and 2, NMRA standard (DCC) or MM1/MM2 standard. •...

  • Page 32: Installation Of The Locomotive Function Decoders

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 The locomotive function decoder correspond functionally completely with the decoders described in point 5. Only features in direct connection with the engine control are missing. This fact is marked in the setting options of the corresponding system format.
  • Page 33 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 5 In case your locomotive is equipped with an interface according to NEM 652, you need for FH18A the connecting adapter N18-G-2. It has already the appropriate connection cables for this socket with an 8 pin plug. The decoder can be inserted into the interface without any problem now.
  • Page 34 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 The connections of the SUSI interface for the sound or function modules are at FH05B on the underside of the decoder, at FH18A on the adapter N18-G and at FH22A-4 on the PluX22 plug respectively on the adapter P22-3. Connect these modules according to the following diagram: red wire ......

  • Page 35: Check After Installation

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Notice: In case of an incorrect wiring of the light or track wire, there is no need to solder off the wires, as the assignement can be interchanged electronically by programming (see setting options of the respective system format: CV51 or. par031, par033).

  • Page 36: Setting Options

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Notice to address range: DCC operation allows only address values from 1 to 127 for DCC-CV01, operating MM values from 1 to 255 are allowed. Values from 128 on lead to restricting the decoder operation only to MM, i.e. DCC operation is no longer possible. DCC “service mode“...

  • Page 37: List Of Supported Cv

    Firmware-Version 1.11 from firmware version 3.12 8.2.1 List of supported CV The abbreviation FH* refers to the decoder types FH05B, FH18A and FH22A. The abbreviation PD* refers to decoder types PD05A, PD06A, PD12A, PD18A and PD21A. Name and definition Range Standard...
  • Page 38 5 = MM-operation with four additional addresses 6 = MM-operation with five additional addresses 7 = MM-operation with six additional addresses Bit 3 = decoder internal use: driving direction at MM1/AC analog Analog mode F1-F8 (not relevant to PD05A) 0-255 Function Value Function Value 0....F1 ....
  • Page 39 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Name and definition Range Standard 0-255 Extended address 0-255 CV17 contains the most significant byte; CV18 contains the least significant byte. Only, if activated by CV29/Bit 5=1. Consist address 0-255 Several compound locomotives run under this address (1-127) 0, 128...
  • Page 40 Value 0..Inverse direction ..........1 1..14 speed steps ..........0 28/126 speed steps ........2 2..Analog operation allowed ......4 (not relevant to PD05A) 3..Check back allowed ........8 5..Locomotive address by CV17/18 ....32 Function mapping F0(f) (see supplement 1)
  • Page 41 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Name and definition Range Standard Function mapping F7 (see supplement 1) 0-255 Function mapping F8 0-255 (see supplement 1) 0-255 Function mapping F9 (see supplement 1) Function mapping F10 0-255 (see supplement 1) 0-255...
  • Page 42 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Name and definition Range Standard 0-31 Dimming LV/LR 0 = dark … 31 = full brightness 0-31 Dimming low beam light (see CV156) 0 = dark … 31 = full brightness 0-31 Dimming AUX1 0 = dark …...
  • Page 43 0-255 106 User identification 2 0-255 112 Speed reduction analog 0-31 (not relevant to FH*/PD05A) 0 = small reduction … 31 = strong reduction 113 Switch off function for LV 0-255 Bit 0 = F1 ... Bit 7 = F8...
  • Page 44 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Name and definition Range Standard 120 Timer for switch off AUX4 0-250 Each 100 ms, 0 = deactivated 121 Function mapping LV+LR on / AUX1+AUX2 off 0-255 Bit 0 = F1 … Bit 7 = F8 122 Function mapping AUX1+AUX2 on / LV+LR off 0-255 Bit 0 = F1 …...
  • Page 45 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Name and definition Range Standard 131 Function mapping low beam light 0-29 (not relevant to PD*) 0 = deactivated, 1 … 28 = F1 … F28, 29 = F0 (light) Only valid if CV137/Bit 4=1 132 Function mapping shunting gear 0-29...
  • Page 46 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Name and definition Range Standard 138 Timer for approach 0-250 (not relevant to PD*) Each 100 ms, 0 = no driving away 139 Timer for waiting 0-250 (not relevant to PD*) Each 100 ms, 0 = no waiting 140 Timer for driving away 0-250...
  • Page 47 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Name and definition Range Standard 145 Conditions for LV 0-161 (not relevant to PD*) Function Value Default value (always on, if function key on) Only forward Only backward Only while standing Only while driving Only at F0 (light) off Only at F0 (light) on...
  • Page 48 154 Brake ramp forward and backward 0-255 (see CV27, not relevant to PD05A/PD06A) Recommended for constant braking distance: CV48 = 0 0 = deactivated If maximum speed step braking time is adjusted in seconds times 8, at smaller speed...
  • Page 49 FH05B = 41, DH05C = 52, DH10C = 102, DH12A = 120, PD12A = 130, PD05A = 131, PD06A = 132, PD21A = 133, PD18A = 134, DH14B = 141, DH16A = 160, FH18A = 170, DH18A = 180, FH22A = 192, DH21A = 200, DH22A = 202 Complete table see: www.doehler-haass.de/„Häufige Fragen“...
  • Page 50 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Name and definition Range Standard 409 Function interchange F9 (as CV401) 0-29 410 Function interchange F10 0-29 (as CV401) 411 Function interchange F11 (as CV401) 0-29 412 Function interchange F12 0-29 (as CV401) BA DH engl FW3_12 Druck.indd 50...

  • Page 51: Operation

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 8.3 Operation Put the locomotive on the programming track and readout the locomotive address (CV01). The default value should be 3. Program the desired locomotive address and start runnig the locomotive keeping these setting values. After the first check you can vary the parameters of the engine freely according to your requirements.

  • Page 52: Supplement 1: Notes To Function Mapping

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Supplement 1: Notes to Function Mapping If you want to activate a function enter the value of the corresponding output according to the following table. In case you want to activate several different functions simultanously you must add up the related values. Output values: RG/AUX6 ABL/AUX5...
  • Page 53 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Switch off function (CV113-116, CV125-128, par024-027, par141-par144) This function gives you the option for deactivating the output (e.g. frontal driving cab light off), despite of activated output (e.g. LV by function F0). Example: A typical situation where to apply the switch off function is the push pull operation.

  • Page 54: Supplement 2: Speed Characteristics

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 Supplement 2: Speed characteristics Speed step characteristic *), Maximum speed characteristic (see CV48 / par051) (see CV05 / par013) in shunting gear Linear ......0 (see CV61 / par018) Strongly curved ....

  • Page 55: Supplement 3: Unamplified Function Outputs

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Supplement 3: Unamplified function outputs As in case the unamplified function outputs (logic level 0 V - 5 V, max. 20 mA) cannot switch higher loads, switching amplifiers (MOSFET, bipolar transistors or the like) must be provided for consumers, which either require a higher supply voltage (>...

  • Page 56: Supplement 4: Electric Coupling / Freewheeling Diode

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 Supplement 4: Electric coupling / Freewheeling diode Electric couplings – i.e. couplings, which can automatically uncouple remotely –- are magnetic articles and therefore inductive consumers. When switiching off the current they may generate by the coil of the magnetic product a high voltage with opposite polarity (up to several hundred volts) by self induction.
  • Page 57 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Please make sure that the function output you have chosen for connecting the electric coupling has a sufficiently high capacity! We recommend the connections AUX3 and AUX4 of our decoders, which are designed for currents up to 1 A. Hint: Use the coupling functions of our decoders (timer for switching off AUX*) to make sure that the function output will be switched off in any case according to a maximum activation time specified by you.

  • Page 58: Automatic Coupling Procedure ("Coupling Waltz")

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from fi rmware version 3.12 ab Firmware-Version 1.11 Automatic coupling procedure (“coupling waltz“) Principle function If a locomotive with attached wagon train has been driven into the station in forward driving and now the wagon train should be uncoupled, the locomotive must approach the wagon train backwards to relieve the coupling.
  • Page 59 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Using the coupling function of our decoder it must be ensured that the function output will be switched off in any case according to a maximum activation time specified by you. Otherwise the destruction of the electric coupling is possible.
  • Page 60 Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Operating the couplings with 2 function keys Should the couplings be connected for example to AUX3 (in front) and AUX4 (at the rear), times are to be entered at AUX3 and AUX4.

  • Page 61: Supplement 5: Constant Braking Distance

    Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Supplement 5: Constant braking distance Function of the “braking ramp” Set the desired braking method in CV27 / par91. Set in CV48 / par051 the linear characteristic (value = 0). Make sure that CV154 / par096 contains the value 0.

  • Page 62: Supplement 6: Decoder Recognition (Type And Firmware Version)

    Locomotive/Locomotive function decoder Fahrzeug-/Funktionsdecoder from firmware version 3.12 ab Firmware-Version 1.11 Supplement 6: Decoder detection Which decoder is it? Please read out the CV261. You can determine the decoder by the read out value with the help of the listing of the CV261 in the CV table of this description.
  • Page 63 Fahrzeug-/Funktionsdecoder Locomotive/Locomotive function decoder ab Firmware-Version 1.11 from firmware version 3.12 Märklin ® is a registered trademark of the company Gebr. Märklin & Cie. GmbH, D-73033 Göppingen Motorola ® is a registered trademark of the company Motorola Inc., Schaumburg, Illinois, USA RailCom ®...
  • Page 64 Company Stamp Doehler & Haass Steuerungssysteme GmbH & Co. KG © 2021 Doehler & Haass Eichelhaeherstrasse 54 Changes and errors reserved D-81249 Muenchen Tel. +49 (0)89 95 47 49 27 technik@doehler-haass.de www.doehler-haass.de Edition 5/2021 BA DH engl FW3_12 Druck1.indd 66 BA DH engl FW3_12 Druck1.indd 66 29.09.21 11:33 29.09.21 11:33...

This manual is also suitable for:

Dh05cFh05bDh10cPd06aFh18aDh14b ... Show all

Table of Contents