Seat Adjustment - Triumph Bonneville Bobber 2018 Owner's Handbook Manual

General Information

Seat Adjustment

Bonneville Bobber and Bonneville
Bobber Black Only
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat.
Do not lean the seat against the
motorcycle or any surface which may
damage the seat or seat cover. Instead,
place the seat, with the seat cover
facing upwards, on a clean, flat surface
which is covered with a soft cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
The seat does not need to be removed
to be adjusted. The seat assembly can
be adjusted for position along the seat
mount by up to 30 mm.
52
To adjust the seat:
• Remove the front fixing from the
seat assembly.
1
2
1. Seat
2. Right hand side fixing
3. Left hand side fixing
4. Front fixing
• Loosen the left hand side fixing and
rotate the seat around the two side
fixings to access the adjustment
slot under the seat.
• Loosen, but do not remove, the two
nuts underneath the seat.
L0130
1. Seat (shown removed for clarity)
2. Nuts
3
4
1
2