Steering/Wheel Bearings; Steering Inspection - Triumph Bonneville Bobber 2018 Owner's Handbook Manual

Maintenance

Steering/Wheel Bearings

Warning
To prevent risk of injury from the
motorcycle falling during the inspec-
tion, make sure that the motorcycle is
stabilised and secured on a suitable
support.
Do not exert extreme force against
each wheel or
vigorously as this may cause the
motorcycle to become unstable and
cause injury by falling from its support.
Make sure that the position of the
support block will not cause damage to
the motorcycle.

Steering Inspection

Warning
Riding the motorcycle with incorrectly
adjusted or defective steering (head-
stock) bearings is dangerous and may
cause loss of motorcycle control and
an accident.
Note:
• Always inspect the wheel bearings
at the same time as the steering
bearings.
98
rock each wheel
Lubricate and inspect the condition of
the steering (headstock) bearings in
accordance with
nance requirements.
Inspecting the Steering for Free Play
To inspect the steering:
• Position the motorcycle on level
ground, in an upright position.
• Raise the front wheel above the
ground and support the motorcycle.
• Standing at the front of the
motorcycle, hold the lower end of
the front forks and try to move
them forward and backward.
• If any free play can be detected in
the steering (headstock) bearings,
ask your authorised Triumph dealer
to inspect and rectify any faults
before riding.
• Remove the support and place the
motorcycle on the side stand.
scheduled mainte-