Table of Contents
Advertisement
DESCRIPTION
The EW-205 sensor is an outdoor passive infrared (PIR)
motion sensor rated for wet conditions. It installs
onto a standard round outdoor junction box using
the supplied junction box cover plate.
The EW-205 sensor uses advanced PIR
technology and a superior lens design to
detect motion. PIR sensing is passive, and
detects the difference between infrared
energy in motion and the background
space.
The EW-205 sensor provides a +24VDC
control output upon motion detection.
This output can be connected to a WattStopper
power pack for on/off lighting control, or to a
WattStopper DM-105 or DM-115-WP Outdoor HID Bi-Level control
module for high/low control.
COVERAGE PATTERN
Coverage is shown as tested in a controlled setting with the unit mounted at 8 ft at a 10° tilt from
the horizontal surface. The actual outside coverage pattern may vary substantially at the specific
installation site and is dependent on several factors including weather conditions, external light
sources, mounting height and sensor tilt.
TOP
90
VIEW
8 ft
(2.4 m)
SIDE
VIEW
EW-205-24
270° coverage
Call 1(800) 879-8585 or 1(972)578-1699 For Technical Support
9.5 ft
25 ft
52.5 ft
(3 m)
(8 m)
(16 m)
Mounting
post
Sensor
lens
Masking:
Opaque adhesive tape is supplied so
that sections of the sensor's lens can
be masked to restrict coverage in
8 ft
unwanted areas.
(2.4 m)
9.5 ft
25 ft
52.5 ft
(3 m)
(8 m)
(16 m)
Coverage adjustment:
The front of the sensor housing can
be moved up and down for easy
coverage adjustment.
Attachment holes
Cover
with plugs
plate
Sensor
housing
2
Advertisement
Table of Contents
